ARIENS KOHLER K301 12 HP ENGINE BLOCK REMANUFACTURED core requir

AT KUSTOM WE ARE A PROFESSIONAL SMALL ENGINE REBUILDER SPECIALIZING IN KOHLER SINGLES, MAGNUM TWINS, AND ALSO ONAN TWIN ENGINES. WE HAVE BEEN DOING THIS FOR OVER 30 YEARS AND ARE CONSIDERED A LEADER IN THIS FIELD! WE CAN HELP YOU WITH YOUR ENGINE NEEDS, BUT ALSO WITH YOUR ENGINE REBUILD AND SERVICE PARTS NEEDS AS WELL.  LOTS OF PEOPLE SELL PARTS BUT ARE THEY EXPERTS IN HELPING YOU DECIDE WHAT TO PURCHASE AND HOW TO USE THEM PROPERLY?

   
 
ARIENS KOHLER K301 12 HP ENGINE BLOCK REMANUFACTURED

Click to see supersized image

Click to see supersized image

Click to see supersized image

Click to see supersized image

Click to see supersized image

Click to see supersized image

Click to see supersized image

Click to see supersized image

See note at bottom! 

THIS IS A BRAND NEW REBUILD NOT A BRAND NEW ENGINE!

  1.  
      •  
        • A properly rebuilt engine is as good or better than a new one because a seasoned block has less tendency to change and warp.
        • This is a totaly remanufactured block and we perform all the work listed below!
        • We have a Wheel Horse pictured but have blocks for most applications.
        • E-mail us or call 330 956-6830 or 330 868-7875 to make sure we have your exact block available before ordering.
        • This is a custom built item when ordered so current time to ship is approximately 2 1/2 to 3 weeks. ( Do not order if you can not wait for us to build!)
        • ( CORE ) A returned core is required for this item, but we pay return shipping on core! You can ship core back before we ship new block , or pay a refundable core charge up front ( same as any autoparts store ) and return core after your new block is installed
        • ( NOTE ) BALANCE GEARS ARE $40 EXTRA AND DO INCLUDE NEW BEARINGS AND YOU MUST SPECIFY AND PAY $40 WHEN ORDERING IF YOU WANT US TO INSTALL THEM.
    • ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

     

    • ? Blocks are acid dipped and sand blasted before starting
    •  All machined surfaces are flattened
        • All blocks are bored oversize or sleeved and bored to standard
        • Valves, guides, and valve seats are remachined for a precision fit and set to our specs!
        • Crank is reground undersize or welded and ground to std. Some pto ends have minor repair as needed.
        • Cam and lifters are reconditioned.
      • All blocks are assembled with new pistons, rings, rod, govenor gear, compression spring, gaskets, and seals.
      • Then we install new points and steel plunger and set!

    ________________________________________________________________________________________

     

    See note at bottom! 

    THIS IS A BRAND NEW REBUILD NOT A BRAND NEW ENGINE!

    1.  
        •  
          • A properly rebuilt engine is as good or better than a new one because a seasoned block has less tendency to change and warp.
          • This is a totaly remanufactured block and we perform all the work listed below!
          • We have a Wheel Horse pictured but have blocks for most applications.
          • E-mail us or call 330 956-6830 or 330 868-7875 to make sure we have your exact block available before ordering.
          • This is a custom built item when ordered so current time to ship is approximately 2 1/2 to 3 weeks. ( Do not order if you can not wait for us to build!)
          • ( CORE ) A returned core is required for this item, but we pay return shipping on core! You can ship core back before we ship new block , or pay a refundable core charge up front ( same as any autoparts store ) and return core after your new block is installed
          • ( NOTE ) BALANCE GEARS ARE $40 EXTRA AND DO INCLUDE NEW BEARINGS AND YOU MUST SPECIFY AND PAY $40 WHEN ORDERING IF YOU WANT US TO INSTALL THEM.
      • ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

       

      • ? Blocks are acid dipped and sand blasted before starting
      •  All machined surfaces are flattened
          • All blocks are bored oversize or sleeved and bored to standard
          • Valves, guides, and valve seats are remachined for a precision fit and set to our specs!
          • Crank is reground undersize or welded and ground to std. Some pto ends have minor repair as needed.
          • Cam and lifters are reconditioned.
        • All blocks are assembled with new pistons, rings, rod, govenor gear, compression spring, gaskets, and seals.
        • Then we install new points and steel plunger and set!

      ________________________________________________________________________________________

       

      • Because these are on older machines just ordering for an application or giving a spec number doesn't insure you will get a motor that fits as someone may have adapted another engine to fit. This is why we always ask plenty of questions about block to insure we send proper product to you.

      • Because these are on older machines just ordering for an application or giving a spec number doesn't insure you will get a motor that fits as someone may have adapted another engine to fit. This is why we always ask questions about block to insure we send proper product to you.

    •  

CHECK OUT THE MANY OTHER ITEMS WE HAVE FOR SALE IN OUR STORE BY CLICKING ON THE TAB AT TOP RIGHT OF THIS PAGE ( VISIT SELLERS STORE )
A CREDIT CARD OR PAY PAL IS REQUIRED! CALL (330) 956-6830 or (330) 868-7875 8 TO 4 MONDAY THRU FRIDAY. ITEMS MAY BE PAID COD IN CASH IF PICKED UP AT KUSTOM 1565 UNION AVE. MINERVA,OHIO 44657


WE SHIP MOST NEW PARTS WITHIN 2 TO 3 BUSINESS DAYS UNLESS WE ARE TEMPORARILY OUT OF STOCK. WE CARRY A LARGE INVENTORY BUT DO RUN OUT OCCASIONALLY. STILL ABOUT 99 PERCENT SHIPS WITHIN 2 TO 3 DAYS.


WE HAVE BEEN IN BUSINESS FOR 32 YEARS AT THE SAME LOCATION. WE ARE A PROFESSIONAL ENGINE REBUILD SHOP AND ALSO SUPPLY ENGINE PARTS AS WE CARRY A LARGE INVENTORY FOR SALE AND OUR OWN USE.


IF YOU NEED HELP OR NEED TO SPEAK TO SOMEONE CALL 330 956-6830 or 330 868-7875 FROM 8 TO 4  EASTERN TIME MONDAY THRU FRIDAY! CLOSED SATURDAY AND SUNDAY
 
This is a custom built ar-10 upper for the Armalite platform. I started with an Armalite compatible AR flattop upper machined from 7075 t6 aluminum. I have have one of these uppers for over 3 years and find it really good quality. Next I installed a genuine Armalite 20" barrel assembly I had perchased for my own build but then had a change of plans. This barrel assembly cost me $375 by itself. Barrel is: Caliber: .308/7.62 X 51mm NATO
 Barrel: 20" Chrome Lined, 4140 steel, M-4 Feed Ramps
 Rifling Twist: RH 1:11/25"
   Finish: Manganese Phosphated Steel I next fitted with an EGW FREE FLOAT handguard which is good quality and lite weight plus has a textured feel to it.. Gas block is a Picatinny Rail steel clamp on from Armalite as well as the flash hider. This upper is lite and grip has a nice feel to it. Pics were taken with a bolt in as it looked better but bolt is NOT included. This isn not a complete upper and you will have to supply bolt, we prefer Armalites. Let me repeat as bolt IS NOT included.  We accept credit card over the phone or we can send an invoice for Pay Pal and both have a 3% fee. We also accept postal money orders or cashiers check.All of our uppers are test fired before shipping and we do polish feed ramps if needed!
   

 

  • Item #: AR12
  • Condition: Refurbished
  * Marked fields are required.
Qty*
Price $739.00