CUB CADET KOHLER K241 10 HP ENGINE REMANUFACTURED core required

________________________________________________________________________________

See note at bottom!

THIS IS A BRAND NEW REBUILD NOT A BRAND NEW ENGINE!

• A PROPERLY REBUILT ENGINE IS AS GOOD OR BETTER THAN A NEW ONE BECAUSE A ( SEASONED ) BLOCK HAS LESS TENDENCY TO WARP AND CHANGE.
• THIS IS A TOTALLY REMANUFACTURED BLOCK AND WE PERFORMED ALL THE WORK LISTED BELOW.
• WE HAVE A CASE PICTURED ( BLOCK SHOWN WITHOUT POINTS BUT YOU WILL RECEIVE BLOCK WITH POINTS INSTALLED ) BUT HAVE BLOCKS AVAILABLE FOR MOST APPLICATIONS OF JOHN DEERE, ( 140 BLOCK SLIGHTLY HIGHER ) WHEELHORSE, ARIENS, SIMPLICITY, JACOBSEN, AND OTHERS.
• CALL 330 868-7875 OR E-MAIL BEFORE BUYING TO MAKE SURE WE HAVE YOUR EXACT BLOCK AVAILABLE.
• THERE IS CURRENTLY A 3 WEEK WAIT BECAUSE THESE ARE CUSTOM BUILT WHEN ORDERED.
• • ( CORE ) A returned core is required for this item, but we pay return shipping on core! You can ship core back before we ship new block , or pay a refundable core charge up front ( same as any autoparts store ) and return core after your new block is installed
• ( NOTE ) BALANCE GEARS ARE $40 EXTRA AND DO INCLUDE NEW BEARINGS AND YOU MUST SPECIFY AND PAY $40 WHEN ORDERING IF YOU WANT US TO INSTALL THEM.

_____________________________________________________________________

• ALL BLOCKS ARE BORED OVERSIZE,  SURFACES ARE FLATTENED, THEN EACH IS CLEANED, GLASS BEADED, AND COATED. NEXT VALVES, GUIDES, AND SEATS ARE REMACHINED AND CRANKSHAFT IS GROUND UNDERSIZE.
• WE REASSEMBLE WITH ALL NEW PISTON, RINGS, ROD, SEALS, GASKETS, AND NEW GOVERNOR. CAMSHAFT AND LIFTERS ARE RECONDITIONED.
• THEN WE INSTALL NEW POINTS, PLUNGER, AND SET POINTS AND VALVES.

____________________________________________________________________

• WE ARE A PROFESSIONAL SMALL ENGINE RE BUILDER HAVING DONE THOUSANDS OF ENGINES OVER THE PAST 30 YEARS. OUR WORK IS SECOND TO NONE AND YOU WOULD HAVE TO LOOK HARD TO FIND THIS QUALITY OF WORK ANYWHERE AT ANY PRICE! 

• Because these are on older machines just ordering for an application or giving a spec number doesn't insure you will get a motor that fits as someone may have adapted another engine to fit. This is why we always ask plenty of questions about block to insure we send proper product to you.

• Because these are on older machines just ordering for an application or giving a spec number doesn't insure you will get a motor that fits as someone may have adapted another engine to fit. This is why we always ask questions about block to insure we send proper product to you.