WHEEL HORSE KOHLER K321 14 HP ENGINE BLOCK REMANUFACTURED

AT KUSTOM WE ARE A PROFFESIONAL SMALL ENGINE REBUILDER SPECIALIZING IN KOHLER SINGLES, MAGNUM TWINS, AND ALSO ONAN TWIN ENGINES. WE HAVE BEEN DOING THIS FOR OVER 30 YEARS AND ARE CONSIDERED A LEADER IN THIS FIELD! WE CAN HELP YOU WITH YOUR ENGINE NEEDS, BUT ALSO WITH YOUR ENGINE REBUILD AND SERVICE PARTS NEEDS AS WELL.  LOTS OF PEOPLE SELL PARTS BUT ARE THEY EXPERTS IN HELPING YOU DECIDE WHAT TO PURCHASE AND HOW TO USE THEM PROPERLY?

   
 
WHEEL HORSE KOHLER K321 14 HP ENGINE BLOCK REMANUFACTURED

Click to see supersized image

Click to see supersized image

Click to see supersized image

Click to see supersized image

Click to see supersized image

Click to see supersized image

Click to see supersized image

Click to see supersized image

 

See note at bottom!

THIS IS A BRAND NEW REBUILD NOT A BRAND NEW ENGINE!

  1.  
      •  
        • A properly rebuilt engine is as good or better than a new one because a seasoned block has less tendency to change and warp.
        • This is a totaly remanufactured block and we perform all the work listed below!
        • We have a Wheel Horse pictured but have blocks for most applications.
        • E-mail us or call 330 956-6830 or 330 868-7875 to make sure we have your exact block available before ordering.
        • This is a custom built item when ordered so current time to ship is approximately 2 1/2 to 3 weeks. ( Do not order if you can not wait for us to build!)
        • ( CORE ) A returned core is required for this item, but we pay return shipping on core! You can ship core back before we ship new block , or pay a refundable core charge up front ( same as any autoparts store ) and return core after your new block is installed
        • ( NOTE ) BALANCE GEARS ARE $40 EXTRA AND DO INCLUDE NEW BEARINGS AND YOU MUST SPECIFY AND PAY $40 WHEN ORDERING IF YOU WANT US TO INSTALL THEM.
    • ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

     

    •  Blocks are acid dipped and sand blasted before starting
    •  All machined surfaces are flattened
        • All blocks are bored oversize or sleeved and bored to standard
        • Valves, guides, and valve seats are remachined for a precision fit and set to our specs!
        • Crank is reground undersize or welded and ground to std. Some pto ends have minor repair as needed.
        • Cam and lifters are reconditioned.
      • All blocks are assembled with new pistons, rings, rod, govenor gear, compression spring, gaskets, and seals.
      • Then we install new points and steel plunger and set!
      • ( A coat of heatproof primer is sprayed on before shipping!)
    •  WE ARE A PROFESSIONAL SMALL ENGINE RE BUILDER HAVING DONE THOUSANDS OF ENGINES OVER THE PAST 35 YEARS. OUR WORK IS SECOND TO NONE AND YOU WOULD HAVE TO LOOK HARD TO FIND THIS QUALITY OF WORK ANYWHERE AT ANY PRICE! 

    ________________________________________________________________________________________

     

    • Because these are on older machines just ordering for an application or giving a spec number doesn't insure you will get a motor that fits as someone may have adapted another engine to fit. This is why we always ask questions about block to insure we send proper product to you.

    • UPDATE ( We have had a number of people order a product other than what we know fits recently, and even after us telling them it wasn't right for their application they told us what to send. Then when engine didn't fit because they measured wrong, they claimed it was our fault. We (always write down what customer says to avoid a problem later). This is very costly to us by the time we return and build another so we have a new policy. If you order a motor other than what is supposed to fit we will tell you and take order. We will send a paper detailing what you wanted and what should fit your tractor and it must be signed and returned. If engine is wrong fit when it gets there we will pickup, return to us , refund your money minus $200 for a twin and $150 for a single and you will have to find elsewhere. 

    • We ask plenty of questions to avoid this so fortunately it seldom happens but some people just don't take the time to check important things we ask them to check and it causes problems.

CHECK OUT THE MANY OTHER ITEMS WE HAVE FOR SALE IN OUR STORE BY CLICKING ON THE TAB AT TOP RIGHT OF THIS PAGE ( VISIT SELLERS STORE )
A CREDIT CARD OR PAY PAL IS REQUIRED! CALL (330) 956-6830 or (330) 868-7875 9 TO 5 MONDAY THRU FRIDAY. ITEMS MAY BE PAID COD IN CASH IF PICKED UP AT KUSTOM 1565 UNION AVE. MINERVA,OHIO 44657


WE SHIP MOST NEW PARTS WITHIN 2 TO 3 BUSINESS DAYS UNLESS WE ARE TEMPORARILY OUT OF STOCK. WE CARRY A LARGE INVENTORY BUT DO RUN OUT OCCASIONALLY. STILL ABOUT 99 PERCENT SHIPS WITHIN 2 TO 3 DAYS.


WE HAVE BEEN IN BUSINESS FOR 32 YEARS AT THE SAME LOCATION. WE ARE A PROFESSIONAL ENGINE REBUILD SHOP AND ALSO SUPPLY ENGINE PARTS AS WE CARRY A LARGE INVENTORY FOR SALE AND OUR OWN USE.


IF YOU NEED HELP OR NEED TO SPEAK TO SOMEONE CALL 330 956-6830 or 330 868-7875 FROM 8 TO 4  EASTERN TIME MONDAY THRU FRIDAY! CLOSED SATURDAY AND SUNDAY
 
   

 

  • Item #: wh14
  • Condition: Refurbished
  * Marked fields are required.
Qty*
Price $769.00